lndustrial Charger(DC UPS)

uXcel-Serie Industrie-Batterieladegerät – Dualsystem

Die 220-V-80-A- und 16-V-60-A-Industrie-Batterieladegeräte von uXcel liefern zuverlässige Energie für Hochspannungsschalter, Relais-Schutzeinrichtungen, Notbeleuchtung und andere kritische Systeme. Sie erfüllen die Betriebsanforderungen von Hoch- und Niederspannungsnetzen und gewährleisten die Stabilität essenzieller Systeme und Alarmfunktionen. Diese Lösung optimiert die Energieinfrastruktur und trägt so zu erhöhter Energiesicherheit, stabiler Stromversorgung und nachhaltiger wirtschaftlicher und sozialer Entwicklung bei.

  • Marke:

    EverExceed
  • Eingangswechselspannung :

    380VAC 60HZ
  • Batterietyp :

    Lead acid batteries
  • Kommunikation :

    Mobus TCP/IP
  • OEM/ODM-Service :

    Yes, customized service available
  • Zertifikate :

    CE, EN61000, IEC60146
  • Ausgangsstrom:

    80A/60A
  • Ausgangsspannung:

    220VDC/16VDC
  • Features
  • TECHNICAL DATA
  • SUCCESSFUL CASES
  • Download
  • Factory
  • Video
  • FAQ

EverExceed| A global leading manufacturer of customized AC/DC power solutions;

Technical features

Custom Dual-System Design

The chargers feature two independent systems in one cabinet, with outputs of 220V 80A and 16V 60A.

Dual Isolation Transformers

Dual isolation transformers for voltage conversion and isolation.

Voltage Adaptation

One system charges 105 batteries, the other 12, with power selectable from either charger or total voltage to meet varying voltage needs.

In Series Connection

The master unit runs under normal conditions, and the slave unit takes over in case of a fault. Once the fault is resolved, both units can operate together or independently.

Modbus & Dry Contact Functionality

Supports Modbus TCP/IP communication and dry contact function, making it easy to connect with the customer’s system.

Touch Screen Control

Customers can monitor charging status and real-time alarms via a touch screen.



Applications


Our partners


ALLGEMEIN
Model uXcel ultra -220V80A/16V60A
Topology 6 pulse full bridge thyristor rectifier
Control Microprocessor controlled system
Standars IEC60146、IEC60439、IEC60725、IEC61000-6-2、IEC61000-6-4、IEC62040(-1,-2,-3)
Configuration Parallel(One work, one standby)
ENVIRONMENT
Operation temperature 0 - 50℃
Storage temperature -20 to +70℃
Relative humidity < 95% ( no condensation of moisture )
Altitude 1000 m Max without derating
INPUT PARAMETERS
Input isolation transformer Galvanically isolated / Primary & Secondary earth screened
AC voltage and tolerance 380VAC±10%, three-phase
Input frequency and tolerance 50Hz/60Hz ±5%
Input protection Input MCCB Thermic magnetic overcurrent protection,AC SPD
OUTPUT PARAMETERS
Nominal output voltage 220VDC/16VDC
Float voltage 0-300V/0-24V adjustable
Boost voltage 0-300V/0-24V adjustable
Voltage stability ±1% in float mode, input within tolernce
Nominal output current 80/60A
Output current adjustment 0‐100% of Nominal Output Current
Output ripple 1% RMS (with battery connected)
Mode of operation constant voltage/constant current
Static voltage regulation < 1%
Efficency 88%
Filter L-C Filter
Output breaker DC1 battery MCCB,DC1 load MCCB,DC2 battery MCCB,Total load MCCB
Battery bank Lead Acid or Nickel Cadmium vented or recombination
Boost voltage (V/C) 2,35 lead acid battery 1,60 NiCd Battery (Depends on battery manufacturer recommendation)
Float voltage (V/C) 2,25 lead acid battery 1,40 NiCd battery (Depends on battery manufacturer recommendation)
MECHANICAL PARAMETERS
External protection IP20, Cold rolled sheet
Panel thickness Load Bearing: 2 mm, Non Load Bearing: 1.5 mm
Frame Colour RAL7035
Noise(dB ) <50 dB
Cooling Fan cooling
Cable Entry Bottom
Dimensions 1600H*1200W*800D(mm)
DISPLAY PANEL & MEASUREMENT
Meter DC1 voltage, DC2 voltage,Total voltage,DC1 current,DC1 current
Protection Charger fault protection (DC overvoltage, DC overcurrent, Over temperature)
Alarm Charger1 fault protection,Charger2 fault protection,BAT over temperature, Mains fault,DC1 overvoltage,DC1 undervoltage,DC2 overvoltage,DC2 undervoltage
Indication LED lamp
Display LCD display
OTHER FUNCTIONS
Other funtions
Battery temperature compensation 3mV/cell, adjustable
Language Customized
COMMUNICATION
Communication RS485, Modbus RTU
Dry contact Charger fault

Elektrische Anwendung

Oil & Gas application

If you need to download files, you need to register as our member first ! einloggen / eingetragen

  • EverExceed uXcel Series Charger Catalog V3.1.pdf

Datenblatt

Worin unterscheiden sich die Ladearten „Ausgleichsladung“, „Boost“ und „Schnellladung“?

Each of these terms describes the same function of the charger where the charger temporarily elevates the battery’s voltage above the float level. There are different uses for elevated charge voltage, as shown below:
Commonly understood meaning of the term
Equalize – Periodic “topping up” of battery capacity, and correct cell capacity differences
Boost – Can refer to “equalize,” “fast charge,” and sometimes both
Fast charge – Faster recharge of a discharged battery



What does “equalize” charging do, and why is it needed?

All batteries, even those assembled into unitized blocks, are built of individual battery cells connected in series to obtain the required DC voltage. Like all manufactured products, there is variation between the capacities of each cell in the battery. As the battery ages this variation increases. Since the battery is a chain of cells that is only as strong as the weakest link some scheme is required to ensure that all cells stay at peak capacity.
A scheme called “equalizing” is commonly used in both lead-acid and nickel cadmium batteries. Equalizing temporarily elevates the charging voltage of the entire battery string above the normal “float” voltage. The elevated charging voltage allows all cells, including the weak ones, to accept more current from the charger than they would at float voltage. A consequence of the elevated equalized voltage is that all cells in the battery are overcharged. This is acceptable for short periods provided the battery has sufficient electrolyte.
Overcharging greatly increases the rate at which the water in the battery electrolyte is electrolyzed into oxygen and hydrogen gas. Since low electrolyte levels will permanently damage the battery it is important to limit when, and for how long, the battery is charged at the equalized voltage.

hinterlass eine Nachricht
Wenn Sie an unseren Produkten interessiert sind und weitere Einzelheiten erfahren möchten, hinterlassen Sie bitte hier eine Nachricht. Wir werden Ihnen so schnell wie möglich antworten.
verwandte Produkte
r
everexceed wurde 1985 als Weltklasseunternehmen gegründet und ist auf sechs Kontinenten tätig.
1.2V wiederaufladbare wartungsfreie NICD-Batterie

EBL Taschenplattensortiment nicd Akku

everexceed Nickel-Cadmium-Taschenbatterien wurden als stabile und zuverlässige Batterielösung für viele industrielle Energieanwendungen geliefert. unsere Blockbatterien funktionieren in einem breiten Temperaturbereich, widerstehen elektrischem Missbrauch, Stößen und Vibrationen und benötigen nur eine einfache Wartung. Dies gewährleistet niedrige Gesamtbetriebskosten (TCO) über einen Lebenszyklus von 20 Jahren oder mehr.
1,2V wiederaufladbare Wartungsfree NICD -Batterie

EBM -Taschenplattenbereich Nicd -Akku

Der Nickelcadmium -Batterie vom Everexexce -Taschentyp wurde für viele Anwendungen mit Stromversorgung stabil und zuverlässige Batterielösung geliefert Unsere Blockbatterien funktionieren in einem weiten Bereich der Temperaturen, widerstehen elektrischem Missbrauch, Schock und Schwingungen und benötigen nur eine grundlegende Wartung Dies stellt sicher, dass eine niedrige Gesamtbesitzkosten (TCO) gegenüber einem Lebenscyclethat 20 Jahre oder länger dauern kann.
hohe Entladungsrate NICD -Batterie

EBH -Taschenplattenbereich Nicd -Akku

Der Nickel -Cadmium -Batterie vom Everexexce -Taschen -Typ wurde für viele industrielle Stromanwendungen stabil und zuverlässige Batterielösung geliefert Unsere Blockbatterien funktionieren in einem weiten Temperaturbereich, widerstehen elektrischer Missbrauch, Schock und Vibrationen und benötigen nur eine grundlegende Wartung Dies gewährleistet eine niedrige Gesamtkosten für Eigentum (TCO) gegenüber einem Lebenszyklus, der 20 Jahre oder länger dauern kann.
2V AGM-Batterie

Ventilregulierte Bleisäure der Unilyte-Reihe

Die VRLA-Batterien der Unilyte-Reihe von EverExceed zeichnen sich durch eine unübertroffene Leistungsdichte, ein platzsparendes modulares Design und eine Lebensdauer von über 20 Jahren aus, um die Gesamtbetriebskosten zu senken. EverExceed Unilyte-Batterien werden unter Verwendung hochwertigster Materialien und modernster Fertigungstechniken hergestellt und sind für Standby-Anwendungen konzipiert, die zuverlässige Leistung und lange Lebensdauer erfordern.
Eine Nachricht hinterlassen
Willkommen bei everexceed
Wenn Sie an unseren Produkten interessiert sind und weitere Einzelheiten erfahren möchten, hinterlassen Sie bitte hier eine Nachricht. Wir werden Ihnen so schnell wie möglich antworten.

Heim

Produkte

um

Kontakt